Canon PowerShot SX280 12MP Digital Camera with 20x Optical Image Stabilized Zoom with 3-Inch LCD (Black)
CUSTOMER REVIEW
I've had a number of PowerShot cameras. Really impressed with the picture quality of the camera and the overall speed. Colors and picture quality are quite good and the low-light performance is superior. The previous review focuses nicely on the picture quality, so I wil stick with the human factors.
Manual control and adjustment are simple to master, so you won't need to rely on the automatic settings. My only concern with the camera is hat the wifi settings are difficult to set up. I'm pretty good with wireless technologies and it took me quite awhile to figure it out. Make sure you run the set up disk. Unlike many other consumer wireless gadgets, this one requires that you run the setup software. Couldn't just turn on the camera and connect it to the router. As much as it pains me to say this, I should've read the directions prior to jumping in to try to set it up! :-)
Once it's setup, it works great. I've been transferring files to iphone, ipad, and laptop; and transferring to the Canon Image site. All directly from the camera. Even emailed my wife a link to a photo directly from the camera. Camera IS a bit of a battery hog, but I was expecting it.
Update: Since I concentrated on human factors in my review, I thought I would weigh in on flash location interfering with handhold
position. Personally, I didn't notice it until I read the other reviews. I've had other cameras with pop up flashes, so I think I just automatically adjusted to it. That said, I can see how it would annoy some people. The flash is located in the front left-hand corner of the camera, but there IS sufficient space behind the flash to place your finger. Could be a problem if you have large hands, I suppose.. Motor is also strong enough to remind me to move it when it pops up.
----------------------------
Update 20 May:: There is a glitch that's been widely reported that shows that the battery is drained when in video mode. This is a glitch in the indicator, not the actual battery life. Cannon has acknowledged the problem and is working on a fix. Expect the next firmware update to address the issue.
-----------------------------
Update 5 June: New Firmware Released Today!! Details Firmware Version 1.0.2.0 incorporates the following fixes and improvements:
1. Increases the duration of movie shooting by 20% in cases where the optical zoom is used compared to cameras running Firmware Version 1.0.0.0 or Firmware Version 1.0.1.0 through a reduction in the power consumption of the optical zoom.
*Time under default camera settings, when normal operations are performed, such as shooting, pausing, turning the camera on and off, and zooming. (based on conditions established by Canon).
-Under some shooting conditions, the recording time may be shorter than mentioned above.
-Recording time with a fully charged battery.
2. Fixes a phenomenon with cameras running firmware version 1.0.0.0, in which the low battery level warning is prematurely displayed while shooting in movie mode.
Firmware Version 1.0.2.0 is for cameras with firmware Version 1.0.1.0 or Version 1.0.0.0. If the camera's firmware is already Version 1.0.2.0, it is not necessary to update the firmware. Please note that, once the camera is updated to the latest version, it cannot be restored to a previous
I installed it with no problems.
via Amazon Best Seller V2 copy copy http://ift.tt/1fvgedx
