Frigidaire PureSource WF1CB, RF100, RG100, NGRG2000, RF-100, RG-100, NGRG-2000, 218994101, 218717805, 240389101 , 240389102, 240394501, SWF1CB, WFB, Sears Kenmore 9910, 469910, 46-9910, 9910P Compatible Water Filter

Frigidaire PureSource WF1CB, RF100, RG100, NGRG2000, RF-100, RG-100, NGRG-2000, 218994101, 218717805, 240389101 , 240389102, 240394501, SWF1CB, WFB, Sears Kenmore 9910, 469910, 46-9910, 9910P Compatible Water Filter

• Replacement For Frigidaire PureSource WFCB RC101, RC200, RF200


• RC-101, RC-200, RF-200, 218710901, 218710902, 218732306

via Amazon Best Seller V2 copy copy http://www.amazon.com/Frigidaire-PureSource-NGRG-2000-218994101-Compatible/dp/B007NXPAQG/ref=pd_zg_rss_ts_la_appliances_5

GoPro HERO3+: Silver Edition

CUSTOMER REVIEW



Be aware when purchasing that there are some aspects to the new "improved" lens that may not be for everyone. This week it has been fairly well documented (and confirmed by GoPro) that while the new lens produces much sharper images under 4', they are blurrier at distances greater than 4'. It does NOT focus at infinity. For reasons not fully explained, they moved the focal point of the lens in close and sacrificed distance clarity.



Update at bottom.



You will get great shots under 4' and soft focus beyond that. Depending on what you want it for, this camera may not be for you and the regular H3 might be a better bet. Since this is an effect of the lens it applies to both stills and video. On the other hand, it's still a decent small action camera, and if you take a lot of video in motion you may not notice this at all. For YouTube uploads and streaming it may not matter, I haven't tested this myself. If you want better clarity in your images the 3B is a good choice. I personally will play with it this week before deciding if I should return it. (Update: it's going back.)



It boggles the mind that they have produced a camera that claims to have a better lens and ignored the fact that it is in fact worse for 90% of what you'll be filming. Great clarity on your handlebars but not so good on the scenery.



Edit: other pluses- the color is much better with the 3+ than the 3. Low light shooting is also better, although sometimes lens flare from lights is a little worse, sometimes better. No more chromatic aberration (yellow/purple fringing). Just do some reading before buying this, they made some trade-offs in the new lens.



Updated 10/17:



Well after comparing the two (3+B and 3B) this week, there are some more problems that have had me downgrade this to a 3 star. For one, the right and left sides of the images on the 3+ are smeared. I mean really distorted, and I'm not using SuperView. Additionally the contrast seems to be set too high, causing some loss of detail in the shadows and blowing out whites a bit. This at least is changeable with a firmware update if they choose to do so. The blurry edges put me over the edge and I'm returning it. It's too bad, it's almost a great camera, with some nice improvements, but the lens is a definite problem, and not necessarily an improvement... certainly not 33% sharper.



via Amazon Best Seller V2 copy copy http://www.amazon.com/GoPro-CHDHN-302-HERO3-Silver-Edition/dp/B00F3F0EIU/ref=pd_zg_rss_ts_p_photo_3

GoPro HERO3+: Black Edition

CUSTOMER REVIEW



Be aware when purchasing that there are some aspects to the new "improved" lens that may not be for everyone. This week it has been fairly well documented (and confirmed by GoPro) that while the new lens produces much sharper images under 4', they are blurrier at distances greater than 4'. It does NOT focus at infinity. For reasons not fully explained, they moved the focal point of the lens in close and sacrificed distance clarity.



Update at bottom.



You will get great shots under 4' and soft focus beyond that. Depending on what you want it for, this camera may not be for you and the regular H3 might be a better bet. Since this is an effect of the lens it applies to both stills and video. On the other hand, it's still a decent small action camera, and if you take a lot of video in motion you may not notice this at all. For YouTube uploads and streaming it may not matter, I haven't tested this myself. If you want better clarity in your images the 3B is a good choice. I personally will play with it this week before deciding if I should return it. (Update: it's going back.)



It boggles the mind that they have produced a camera that claims to have a better lens and ignored the fact that it is in fact worse for 90% of what you'll be filming. Great clarity on your handlebars but not so good on the scenery.



Edit: other pluses- the color is much better with the 3+ than the 3. Low light shooting is also better, although sometimes lens flare from lights is a little worse, sometimes better. No more chromatic aberration (yellow/purple fringing). Just do some reading before buying this, they made some trade-offs in the new lens.



Updated 10/17:



Well after comparing the two (3+B and 3B) this week, there are some more problems that have had me downgrade this to a 3 star. For one, the right and left sides of the images on the 3+ are smeared. I mean really distorted, and I'm not using SuperView. Additionally the contrast seems to be set too high, causing some loss of detail in the shadows and blowing out whites a bit. This at least is changeable with a firmware update if they choose to do so. The blurry edges put me over the edge and I'm returning it. It's too bad, it's almost a great camera, with some nice improvements, but the lens is a definite problem, and not necessarily an improvement... certainly not 33% sharper.



via Amazon Best Seller V2 copy copy http://www.amazon.com/GoPro-CHDHX-302-HERO3-Black-Edition/dp/B00F3F0GLU/ref=pd_zg_rss_ts_p_photo_1

GoPro HERO3: White Edition

CUSTOMER REVIEW



Gopro Hero 3 Black: Purchase date: March 7, 2013. This is a long review, but I have addressed some technical issues here that may assist you if you have bought a Gopro Hero 3, or if you plan to. I have put mine through its paces for nearly 2 weeks before posting this.



The first thing you must do is update the firmware manually. After several attempts with the automatic process, my Gopro -and many others I suspect- failed to update, and it was never at all apparent that the process failed. After several days of use, the camera began to malfunction. If you don't get your firmware updated successfully, you are guaranteed to have major problems.

Here is a quick guide on how to manually update your firmware: (If you have a Mac, or are not computer-savvy, check online for more detailed instructions. Lawrence M. Friedman posted a comprehensive how-to on Gethypoxic.)

1. Jot down your serial number (both lines) from inside the battery port. Insert a Class 10 micro SD, battery, and take a picture to ensure your card is good. Ensure WiFi is off, and charge your camera to 2 bars if necessary. (Steps 1-5 on the update instructions at GoPro.com.) At this point, do not connect your Gopro to your PC.

2. Instead, download the update files from Gopro.com onto your PC. To do this, follow the prompts for 'manual update.' Complete the registration fields.

3. Connect the camera to your PC & power up. Open your Gopro drive, then move the update files from your PC onto your Gopro. DO NOT put the files into either folder (DCIM or Misc), just place the files next to those folders (root).

4. Disconnect your GoPro from your PC, then turn it back on. This should initiate the update process.

IMPORTANT: Now pay attention to your Gopro LCD display. During the process, look for the message on your LCD that reads 'updating.' Your front LED light will flash intermittently. You will soon see a progress percentage on your LCD and the blue WiFi light will turn on. Make sure your progress climbs to 100%, then your camera will shut itself off.



If you do not observe your camera behaving as I described, the update did not work and you will have to try again. If the process fails, do not expect to receive an 'Update Failed' message as Gopro claims. The firmware issue is causing huge problems for many users; largely because they believe that they successfully installed the new firmware, but the process actually failed.



After my firmware was updated successfully, I have not experienced any of the major failures that many users have reported. My battery does not drain overnight when turned off as some people have reported. My camera never fails to read its SD card. I started & stopped recording via WiFi repeatedly, and everything worked great. Freezing is the major catastrophic problem common in the negative reviews. I shot video for 45 minutes continuously and never had any lock-up issues during use. I function-tested every option in the menu and never experienced any malfunction, but for one exception.

My camera froze a few times when powering on, requiring a battery rip. I'm not sure what causes this, and it happened only a few times over the past 2 weeks, while I have turned the camera on & off hundreds of times with no issues. Some have theorized that it is related to using the USB charger, or moving files off of the SD card, but I have been unable to determine a common condition that will cause the problem consistently. You can expect to experience this glitch too; it is a very common report on the Gopro forums, and I have friends that have had the same experiences. We are hoping that Gopro will solve this issue with another firmware update. Note: If you are forced to pull the battery, leave it out for at least 60 seconds. Update 7-3-13: After 4 months of heavy use, my Gopro Black is working flawlessly. It has not frozen during use or startup after the latest firmware update (Version 2.39). Some of my friends have experienced occasional freezing, but it's very rare; note: we use our Gopro H3B's on a daily basis.



If you're going to buy a Hero 3, update the firmware manually right out of the box. After that, if you have freezing issues, a defective battery, or buttons that do not work as they should, just take it back to the store for an exchange or refund. Best Buy gives you 15 days. I can't imagine dealing with any customer service trying to fix a lemon. I don't get why anyone even tries. That being said, my remaining criticisms are relatively petty, and are being made against a functional Hero 3 Black. The bottom line is that I love this camera so far. It earns 4 stars.



Be prepared for a fast-draining battery. The 45-minute video I mentioned earlier took my battery from 100% to no bars. However, after the 45-min recording, I was able to shoot an additional 28 minutes on fumes (with no bars showing on my battery gauge) before it died. This battery test was made on the 1080/60 setting, without WiFi or Protune in use.

You will likely need a backup battery plan, such as spares with a wall charger. There is a great kit on Amazon for $29 made by Wasabi, Wasabi Power Battery (2-Pack) and Charger for GoPro HD HERO3 and GoPro AHDBT-201, AHDBT-301 or the Gopro battery Bacpac (which I have never tried). Note: You can swap batteries and your settings will not return to factory defaults. I left my battery out for 5 minutes and it still retained my settings. This is a huge positive for Gopro since I routinely swap out batteries. It would be a real pain to reset my resolution & preferences every time, not to mention the date/clock. I use my Gopro for skydiving, which means my videos are short, and I am never far from an A/C outlet. The battery life on the Hero 3 could pose a challenge for those who venture into the wilderness...or the water. Something to think about. I used a Hero 2 for a year, and the difference in the battery life is noticeable. Note: It took 140 minutes to charge my battery from totally drained to 100%. From the point of no bars to 100%, it took 100 minutes to fully charge. These tests were done with the included USB cable connected to a PC.



My other minor complaints include the lack of a printed manual. I downloaded it from online, then printed the PDF, so I have a 66-page 8.5x11" book. A pocket-sized manual that I can fit in my camera case should be standard issue with a $400 package. This is not too big of a deal because once you learn the system, there are only 6 to 8 pages from the manual that are actually useful.



The panel that covers the charging port is not tethered, so I already know that this little door (14 x 21mm) will eventually get lost. Another issue is that the unit gets hot while recording; but as long as it doesn't do any damage or cause a breakdown, I guess that's just the way it is. A Gopro will not allow itself to overheat; it will shut down automatically if it gets too hot.



When you open up your DCIM folder after recording, you may notice several blank-icon files (type LRV & THM) scattered among your video/picture files. Some computer people call these "mouse droppings." The LRV files can be changed to MP4 and are functional as a mini clip. This is useful for efficient editing projects on slower computers. After setting up your edit, you then replace the LRV with your original HD file. The THM files can be changed to JPG and serve as thumbnails to your photographs. But I just delete all the droppings. I don't fully understand how to exploit them, and they only show up once in a while.



The greatest improvement over the Hero 2 is the new video options available. The 1080p/60fps is my favorite setting. This feature alone is the reason I bought the H3B. The Hero 2 would only shoot 30FPS on 1080. And to my delight, once I selected 1080/60 on my H3B, I found that I can then adjust the FOV within that setting. On the hero 2, your FOV options were very limited depending on your resolution setting. The H3B gives incredible freedom to customize the look of your recordings. Note: The recording versatility on the Black edition is better than on the White or Silver models. The premium price is not just for the remote.



The 4k cinema mode is essentially useless to me. It offers a maximum frame rate of 15 FPS, which resembles a slideshow. The 2.7k offers 30 FPS, and renders incredibly impressive resolution, but you'll be lucky if your computer can play it smoothly. After seeing the excellent results of the 1080p/60FPS videos, I doubt I will ever change that setting except to do super slow-motion, for which I would use 120FPS-- which is only available on 720p resolution. Apparently, there is a plan from GoPro for an upcoming software update that will expand the FOV options on the 720/120FPS mode. Right now it's Wide only. UPDATE 5-7-13: The new firmware update gives more FOV options.



The WiFi remote is definitely cool and handy. It makes it a snap to control your camera after it's mounted. It is simple to set up and operate. But like the camera, the remote battery drains quickly; and the charging cable is proprietary, so you will have to take it with you to charge the remote during downtime. I also installed the GoPro app on my Android smartphone. This allows you to use your phone as a remote. You can see on your phone what the camera sees, even while it's not recording; lots of fun possibilities there.



The camera is noticeably thinner and lighter than the H2. The buttons are easier to activate; they are larger and more sensitive. It also uses a Micro SD card, not the standard SD used by the Hero 2. Because the height & width are unchanged, the casing doors are interchangeable with the Hero 2, and the LCD Bacpac from my H2 is fully functional on the 3; that made my day!



The firmware situation is unfortunate, and Gopro owes a lot of customers a big apology. I myself grew quite frustrated until I was advised to use the manual process. This review was going to be a 1-star profanity-fest, until I figured out the firmware debacle. If you disregarded all reviews of the Hero 3 in which the user failed to update the firmware, I'm sure the overall feedback would be much more positive. Even after my initial troubles, I am still a fan of Gopro. I can live with the power-up freezing glitch for now. For skydiving and short trips, the Hero 3 Black is a great camera. Blue skies!



via Amazon Best Seller V2 copy copy http://www.amazon.com/GoPro-CHDHE-301-HERO3-White-Edition/dp/B009TCCTSQ/ref=pd_zg_rss_ts_p_photo_4

Haier HVTM08ABS 8-Bottle Wine Cellar with Electronic Controls

CUSTOMER REVIEW



This wine chiller is great for the price I paid. I like the slim width of the unit, the digital temperature controls, and the interior light is a nice touch (the light is not quite bright enough though).

It seems well made and is very quiet. Nice job Haier!



via Amazon Best Seller V2 copy copy http://www.amazon.com/Haier-HVTM08ABS-8-Bottle-Electronic-Controls/dp/B00519CX1E/ref=pd_zg_rss_ts_la_appliances_5

Canon EOS Rebel T3 12.2 MP CMOS Digital SLR with 18-55mm IS II Lens and EOS HD Movie Mode (Black)

CUSTOMER REVIEW



Updated 8/6/13



Even though this camera was released back in early 2011, it still is a wonderful and simple camera to use which delivers excellent image quality under any shooting conditions.



The camera has a glossy plastic finish which doesn't exactly exude quality or make it feel like a high-end camera. But construction on this camera is very tight. The plastic is light-weight but its not flimsy like you would expect. There is no rubberized handgrip, which I think was a mistake to omit this on this camera. Especially since its predecessor (and its competitors) have them. Outside of that, the hand grip is a very nice size. The one upshot to the lightweight plastic is that the camera feel very light with the kit lens attached.



One thing you have to watch out for is that the camera feels very out of balance when attaching a heavier lens. The Canon EF-S 18-200, while a good performer optically when paired with the T3, feels way too front heavy. And this will be true with a lot of the pro-grade Canon lenses that you attach to the T3. That said, this camera is a perfect DSLR for hiking due to its light-weight design (when used with the kit lens). It doesn't weigh you down or make you feel like you have a boat anchor around your neck.



The buttons and menu system have the typical degree of straight-forwardness found in most Canons. Canon's menu system is easy to learn and navigate through. That makes the T3 a good candidate for a student or someone that wants to learn photography in general and wants a camera they can grow with. Of course it offers full Auto mode but when you're ready to try and manipulate the more advanced manual controls, the Canon Rebel T3 is about as unintimidating as they come. It's also a great entry into the DSLR realm for hobbyists currently using an advanced point and shoot (and can be found for almost the same price as some advanced point and shoots).



With the exception of burst shooting, this camera's performance is excellent. Excellent start-up, shot-to-shot, and autofocus performance. It has 9 autofocus points compared to its predecessor's 7 points. I do not reccommend this camera as a budget action shooter. It has a slow continuous burst rate (2.7fps) and a very limited buffer. The Nikon D3200 shoots at 4 frames per second, but that is currently retailing for $200 more than the T3. So you'll have to decide whether or not that feature is important to you.



The camera comes with a nice, chunky battery which delivers excellent battery life. The viewfinder is 95% coverage and I found it to be satisfactory, some people say its really cramped but personally I think it's alright. The screen resolution is rather low at 230k, but in real-world use it's not as bad as you would think, and somewhat viewable in direct sunlight. I think both the viewfinder and the LCD are of better quality than the ones found on the Nikon D3100. And overall, the T3 is faster and more fluid than the D3100. After having shot with both cameras, I personally think the T3 is more enjoyable to shoot with... despite the D3100's better plastic and more advanced spec sheet.



The camera ships with the standard 18-55 kit lens but I suggest buying the kit which includes the additional 55-250 lens. The kit lens is sufficiently sharp but it might be worth investing in the newer 18-55 STM lens, as it is reportedly sharper than the 18-55 lens included with this camera.



Despite having a sensor that is of lower resolution than the newer Rebel SL1 and Rebel T5i (12 megapixels is still plenty for everyday use), the camera has image quality that pretty much matches or exceeds those cameras in most areas. It takes a very clean shots up to and including ISO1600 and has excellent dynamic range, color reproduction, and exposure. The camera does a nice job of balancing noise reduction with detail retention up through about ISO3200. And despite being 2 1/2 years old..it still competes very well with newer models on the image quality front.



The movie mode, while delivering solid video quality, is rather limited. It's 1280x720 HD and there are very limited manual controls. It's more like something you would use for quick clips rather than longer videos or movies. I think the Rebel T5i & SL1 are better choices if you're equal parts into videos and photos as they have far better video modes than the T3 does. But if you're main interest is stills photography, this probably won't matter much to you.



The Rebel T3 may not be the sexiest camera around but it is a simple, enjoyable camera to shoot with that delivers nice results with minimum effort and it appeals to a broad range of folks from DSLR newbies, to hobbyist, to even professionals looking for a light-weight backup to their higher end gear. At its current price, it is a great value and I highly reccomend it.



via Amazon Best Seller V2 copy copy http://www.amazon.com/Canon-Rebel-T3-Digital-18-55mm/dp/B004J3Y9U6/ref=pd_zg_rss_ts_p_photo_4

ViewSonic VFD621W-70 6-Inch PortraitView Digital Photo Frame Features High Resolution 480 X 800 Screen and Built In Light Sensor (White)

CUSTOMER REVIEW



This is a quick review because I don't have time to get in depth. I'm giving 5 stars because I purchased two to give as gifts and I'm buying three more, two as gifts and one for myself. The photos look good and the clock/calendar functions are well implemented. I can see this being good for the office and kitchen.



Here is what you need to know:

- The image measures 6" on the diagonal (3" wide by 5" tall).

- JPEG only, max 4000 x 4000 pixels

- The unit sits vertically. Landscape photos are automatically cropped to fill the screen. Landscape photos with subjects on the edges will crop out the subjects.

- The unit requires a dedicated SD memory card. Built-in memory is only 3MB.

- There is a coin type battery (CR2032 to be exact) that comes with the unit. The manual doesn't mention it but I'm pretty sure it is only to keep the clock and calendar when the AC power adapter is unplugged.

- The power cord is about 3' long.



via Amazon Best Seller V2 copy copy http://www.amazon.com/ViewSonic-VFD621W-70-PortraitView-Features-Resolution/dp/B0093IBQU8/ref=pd_zg_rss_ts_p_photo_3