Whirlpool Stove 8-inch Surface Burner Element 9761345 / 8053268

CUSTOMER REVIEW



Our older range burnt out the 8 inch surface burner element and connector. I already had a spare connector from an earlier repair but needed a new element. I researched and picked out this 2600 watt element instead of a lower 2100 watt element. The element came in a ziplock type bag. Not exactly sealed but it was new. I washed the new element to minimize the burning of fumes from a brand new element. Turned on the vent fant, hooked it up and turned on the heat. The element smoked a little bit but that quickly stopped.



One thing I noticed was the most inner ring did not appear to sit flush/flat along with the rest of the rings. It was raised higher than the rest of the rings. I had thought about exchanging it because I was worried about our pots and pans not being flat on the element during cooking. I compared our other existing elements and they have flat surfaces on the rings. So it looks like with use, the rings flatten with heat. I decided to use it the way it is, after a day or two, the rings of the element now are all flat.



There is a stamping under that show it is 2600 watt for 240 v, but I don't see any country of origin. Our existing element are made in US. My guess is this new one is from China, but I can't confirm it.



UPDATE 01/03/2014: IMPORTANT READ! Initial rating for this element was 5 stars, now it is one star because it exploded. A section glowed bright white, started sparking and exploded. Fire alarm went off. We were very fortunate that no one sustained injuries. The parts of the element that sparked, flew a short distance causing very minor stain to the range top, a couple pots sitting on the other unused elements. The pot that was on this element was a Corning ware glass pot (I think it's no longer made). That pot sustained the most damage, melted parts of the glass on the outside. We won't be using the pot due to the damage. The other pots nearby just had what appears to be the metal that flew and "stained" the pots on the outside. Best way to describe might be like how hard water leaves a stain on a surface - except this does not come off. The connector/socket that the element connected to was fine, the clip that holds the connector/socket and screws into the range top was damaged beyond re-use. The switch for that element works but now the light shows "HOT" even in off position.



So in all, I'm out a non-replaceable favorite pot for my wife, some surface stain/damage to a couple others, I purchased a switch ($25) so the light is not lit when the element is turned off. Spent 1/2 a day interchanging parts between new switch and old switch because it's near impossible to find the exact replacement. Lucky I had extra connector/sockets and clips around (from older repairs) so I didn't have to spend for that repair. I still need to find a replacement element for this exploded one. I have contacted Amazon to see what can be done even though I'm out of the return period.



Here is a pic of the element.



[...]



Searching the net results in others also encountering a similar fate, so I know it does happen, even though it's our first time experiencing it and we've used the range over 15 years.



My advice to others that read this....if this happens to you, first thing, head to the fuse box and turn off the range, it most likely will die out on it's own but be ready to put out anything that catches fire. My first instinct was to reach over and turn off the knob for the element, glad I didn't and now I know better.



UPDATE 02/04/2014: I have been using this replacement (see link below) for about a month and I highly recommend it. It is a Frigidaire branded element, comes in a sealed Frigidaire packaging and is made in Mexico. For my case, I made sure I purchased it from Amazon as the seller and no other. I recommend this for others as well, even if it costs a little more than the 3rd parties.



A couple important notes, this new Frigidaire element had barely any smoking right from the beginning and I don't recall smells like the other 'bad' one. The surface material/texture is slightly different as well, more greyish. No dusting left on the bottom after use.



[...]



I'm going to add a review for it shortly.



[...] if you have any questions, I will be more than happy to answer if I can be of help.



via Amazon Best Seller V2 copy copy http://ift.tt/1l7xHMg

W10295370 Refrigerator Water Filter W10295370 3 Pack

CUSTOMER REVIEW



I received the refill and have plugged it in.

The taste and quality of the water of the original was at a high standard.

So far, the taste and quality of the water from the first filter is the same - great.

Makes great coffee and tea ( the secret is in the water quality)



via Amazon Best Seller V2 copy copy http://ift.tt/MpOL1i

Canon PowerShot SX510 HS 12.1 MP CMOS Digital Camera with 30x Optical Zoom and 1080p Full-HD Video

CUSTOMER REVIEW



I have the professional Canon 5D Mark 2 camera with all the lenses, flash filters and everything else, but I needed a small camera for riding my motorcycle to events. After researching I settled on the Canon PowerShot SX510 HS, which I am glad I did. The first weekend I took over 300 photographs and I am extremely happy with this camera. I was really surprised at how small it is but it does take a nice 12 meg picture. For the price, I can't imagine using anything else.



via Amazon Best Seller V2 copy copy http://ift.tt/1jrIfVY

AYL Portable Mini Speaker System with Rechargeable Battery (Red) (Personal Computers) newly tagged "iphone"

via iphone: Newly tagged products at Amazon.com http://ift.tt/1o2GZsG

Apple iPhone 4G Metal Black Middle Cover Case Housing Bezel Frame Panel with Side Button (Wireless Phone Accessory) newly tagged "iphone"

via iphone: Newly tagged products at Amazon.com http://ift.tt/1fGqJYe

Fujifilm Instax MINI 7s White Instant Film Camera

CUSTOMER REVIEW



// var cv_mo38IJCNIEHIN99RollOverImg = new Image(); cv_mo38IJCNIEHIN99RollOverImg.src = "http://ift.tt/1kYU1Fc"; var cv_mo38IJCNIEHIN99preplay = document.getElementById('cv_mo38IJCNIEHIN99preplayImageId'); if (cv_mo38IJCNIEHIN99preplay) { cv_mo38IJCNIEHIN99preplay.onmouseover = function() { cv_mo38IJCNIEHIN99preplay.src = "http://ift.tt/1kYU1Fc"; } cv_mo38IJCNIEHIN99preplay.onmouseout = function() { cv_mo38IJCNIEHIN99preplay.src = "http://ift.tt/N7Hh3P"; } var node = cv_mo38IJCNIEHIN99preplay.parentNode; var cv_mo38IJCNIEHIN99currentClick = node.onclick; node.onclick = function () { var head = document.getElementsByTagName("head"); if (head[0]) { var logTag = document.createElement('script'); logTag.type = "text/javascript"; logTag.src = "/gp/customer-media/du/log.html?ie=UTF8&p=CustomerImage&s=CustomerVideoPlay"; head[0].appendChild(logTag); } if (cv_mo38IJCNIEHIN99currentClick) { return cv_mo38IJCNIEHIN99currentClick(); } } } Length:: 6:03 Mins



This is a great camera for on-the-go memory keeping and parties. In the video I go over the features and basic functionality. Full text review on CraftTestDummies.com.



via Amazon Best Seller V2 copy copy http://ift.tt/N7Hh3R

Foscam FI9821W Indoor Pan/Tilt H.264 720p Wireless IP Camera, 1/4" Color CMOS Sensor, F: 2.8mm F:2.4 (IR Lens), IEEE 802.11b/g/n Wireless Connectivity, Black

CUSTOMER REVIEW



6/13/2013 UPDATED entire review based on latest firmware update 1.1.1.13



**REVIEW**



THE GOOD:

1. Video Performance is excellent due to using h264 compression. Even when on wireless and running at 720p @ 30fps I get smooth motion

2. Web User Interface. Excellent! Very fast and easy to use and most importantly clean looking. You can toggle IR on/off.

3. Colors appear accurate

4. Excellent coverage for built in IRs.

5. Wireless signal is excellent. I am about 20 feet away with several walls on the way from the router and get strong signal. There has been numerous issues with WiFi disconnection in earlier builds, but this should be addressed in .12. It also depends on the router that you are using and I have not had disconnect issues with Netgear R6300.

6. Built in speaker is a nice feature to have, but see cons

7. Lens angle is good at ~70 degrees, I rarely us PT feature in cameras, so extra degrees always nice to have, but extra angle come with slight distortion at the edges.

8. Image masking is working well

9. Works in IE/Chrome very well after downloading browser extensions.

10. Setup was straightforward

11. Works well with IPCamViewer for Android. Most functions can be controlled via app.

12. You can upgrade lens on this camera. Although it will void warranty.

13. Able to set default position after restart with the firmware update

14. Using IPCamViewer for Android app and it supports all camera functions needed.

15. RTSP stream is now available after firmware .11.



I CAN DEAL WITH IT:

1. Most important thing on any camera is the image quality and I really had high hopes for this one. Prior to the firmware update (2/1/13) I was highly disappointed with the image quality but Foscam has listened to the feedback and addressed IQ starting with firmware .10. It's not a groundbreaking improvement but for the price of this camera it's decent

2. Expected from the specs, but lens is not bright enough (F2.4 aperture) for night time viewing through the window without IRs. My Zavio F3206 with F1.8 aperture can handle this much better. Obviously if you do turn IRs on the camera and try to see through the window you won't be able to see anything at all. The workaround for me was to buy external IRs (about ten bucks) and put them outside the window. (UPDATE: You can upgrade lens yourself)

3. Limited video settings (can't do custom exposures) so not much image control other then color, brightness, sharpness.

4. 2 LEDs in the back camera that you can't turn off. I had to put a black tape over it.

5. Manual focus ring a bit difficult to turn and because there is latency on the displayed image it will take a few tries to get the picture perfectly in focus

6. Zoom up/down (should be called Zoom in/out) is a bit difficult to use. You have to right click on the image and then select zoom in/out and there is no control over how much you can zoom. So you have to click 52 times (yes I counted) if you want to zoom in all the way in and again 52 times to zoom all the way out. It should really be a slider on the left where all other image control settings.

7. Can't seem to purge the log it creates which is in just couple of days already at 14 pages. Clear/Reset button would've helped.

8. Issues with sending motion detection emails, it works a bit better in latest update, but still needs work

10. Update .10 Added mjpeg stream via url, unfortunately it's limited to VGA@15 fps.

11. Camera will not work in mobile browsers (iPad, iPhone, etc...). You have to utilized apps for that.

12. Camera is actually larger then most other PT cameras and I really don't like the design.

13. Can't control volume on speaker or microphone



OH THE HORROR:

1. Prepare to deal with the firmware issues. There are a lot of features that are either incomplete or don't work as advertised, before buying this camera visit Foscam forum to read the feedback. I am personally sticking with the camera in hopes that Foscam will address all major issues in future updates

2. As of firmware update .12 & .13 camera doesn't work with hidden wireless SSID. It appears it worked in .10 update

3. Camera occasionally locks up



MY IP CAM BACKGROUND: I've been testing various "HD" (at least 1MP) IP cameras over the years from brands such as Axis, Trendnet, Edimax, Zavio, Dlink and Zyxel, but stayed away from Foscam mainly because it had low resolution sensor and awful looking web interface. Foscam changed this with the introduction of FI9821W. Overall this is an ok entry to "HD" PT camera for the price.



SETUP: Setup itself is not much different then any other IP camera on the market. If you never done this before probably best to contact technical support to save you from frustration, but if you setup IP cameras in the past it should be no brainier. First connect the camera to the router using the Ethernet cable, insert the included CD in your PC and use the search tool to get the IP address and Port of the camera. Double clicked on the IP address found with the search tool which will open up a browser. You will need to install plugin/extension/activex control (depending on the browser) before you can see live image. Login with admin account. The rest of the settings needs to be customized to your preference and if you don't know what you are doing again I would suggest to get in touch with the technical support. At the very least you could go to wireless settings and connect to your wireless network.



CONCLUSION: I think this camera will deserve a solid 4 when they finally address most of the issues. When I bought this camera I couldn't find anything else for the price with the feature and extra resolution and Foscam has been consistently releasing firmware update that addressed some of the concerns, including image quality.



Review based on firmware 1.1.1.13



Other cameras that I use:

My current favorite camera is Zavio F3206. It has bright lens and full 1080p resolution, doesn't have IRs though or PT, but picture and bright wide angle lens make up for it. Also, I use Edimax 7110PTn & 3115n. First one is PT camera like this one, colors are not that great, but has been a solid camera for baby monitoring and cheap 3115 is actually pretty decent one too for day light indoor monitoring. Dericam H502W is a good alternative but image quality a bit lower then on FI9821.



via Amazon Best Seller V2 copy copy http://ift.tt/1fw1Yhu