Gas Range Oven Igniter for WB2X9154, WB13K3, WB13K4, 4342528
CUSTOMER REVIEW
Item worked just as it should. I can give you a few tips about installation:
1. Remove oven door (easy, just lift it off hinges)
2. Remove bottom drawer, shelves and bottom pan (Ez just two screws in back on pan, flat head screwdriver)
3. Important! Remove entire bake burner tube (ez- remove three screws, 1 in front & 2 on back wall behind drawer W/ 1/4" nut driver)
4. Splice wires from new igniter to existing wires from stove (ez-cut old wires near old igniter to leave plenty of slack)
5. Remove old igniter from bake burner (ez- just 2 screws 1/4" nut driver.
6. Reverse instructions to install new unit. Took me about ten minutes total and oven works fine now!
via Amazon Best Seller V2 copy copy http://ift.tt/1wWq9hX
Tidak ada komentar:
Posting Komentar