The drain hose goes into a standpipe drain or other household plumbingRemove the drain hose and pour a quart of water into the standpipe or drainIf water will not drain a plumber is recommended. As you watch the machine in action one of the following problems will likely be identified.
How To Fix A Washing Machine That Won T Drain Washing Machine Repair Washing Machine Drain Hose Washing Machine
It isnt that difficult to access the insides of a washing machine to service the motor and that may be what you have to do if it doesnt spin and drain properly.
Washer won't drain completely. Too many suds with little water indicate too much detergent. The drain pump is the one that will have the drain hose connected to it. To determine if the lid switch assembly is defective use a multimeter to test each of the lid switches for continuity.
Below is an image showing the drain pump and recirculation pump. Identify whats causing the block and fix it so that your washer can start working. Clog in the rubber drain tube leading from the washing machine to the drain standpipe Material obstructing the water pump filter or impellers A mechanical failure of the water pump Loose or broken drive belt.
If the washer wont drain there might be a clogged pump or hose. This video provides information on how to troubleshoot a top-load washer that wont drain and the most likely defective parts a. RINSE light is flashing or Po is scrolling on the display 2015 and newer modelsThe washer took to long to pump out.
Lid Switch Assembly Failure. Its common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. How to Fix a Washing Machine to Drain Completely Step 1.
The following are some causes and possible ways of fixing your LG washer. A failing drain pump can also prevent your washer from completely draining. Many washers will not run if the lid is ajar.
Remove the screws and lift off the front panel. If your front-loading washing machine doesnt drain there could be an easy fix especially if you own a newer Maytag masher like the maytag 2000 series washer. When your LG washer wont drain water completely then the pump could be blocked causing it to stop at mid-cycle.
When this happens the pump may be driven intermittently or at less than full speed resulting in insufficient drainage. Pumps can fail for a variety of reasons. Look for excessive suds inside the washer.
Before you disassemble the. Remove the hoses from the pump in order to remove the article of clothing. Tilt the washer back and slide blocks under the front legs for easier access to the screws.
Washing machine not draining. There may be a clog. Its also not uncommon for the belt that drives the pump to begin slipping as it ages.
I hope this information has assisted you. If the lid switch assembly fails the washer will not drain. If a lid switch does not have continuity replace it.
The drain pump impeller could be damaged causing the lack of water flow through the pump and out the drain hose which will cause it not to drain completely. Inspect the lid on the washer to verify it is completely closed.
